Dividing head missing parts

Help Support HMEM:

Iampappabear

Member
Joined
Mar 10, 2018
Messages
13
Reaction score
1
I have a Rockwell dividing head very similar to the one in the image. Unfortunately the parts that causes friction between the indicator arms and the dividing head are missing so although they are at the correct spacing they never hold position. using a little clamp works to a degree, however, I would sure like a proper working gripper system.

If anyone has a similar dividing head and can shed some light on how the friction system should work, I would greatly appreciate some guidance.

Thanking you all in anticipation.

Colin
 

Attachments

SmithDoor

Well-Known Member
Joined
Feb 12, 2009
Messages
515
Reaction score
67
Location
Clovis Ca
Sounds like it is compound indexing
Please post more photos

Dave

I have a Rockwell dividing head very similar to the one in the image. Unfortunately the parts that causes friction between the indicator arms and the dividing head are missing so although they are at the correct spacing they never hold position. using a little clamp works to a degree, however, I would sure like a proper working gripper system.

If anyone has a similar dividing head and can shed some light on how the friction system should work, I would greatly appreciate some guidance.

Thanking you all in anticipation.

Colin
99
 

Latest posts

Top