PolskiFran
Well-Known Member
- Joined
- Dec 7, 2007
- Messages
- 61
- Reaction score
- 0
Here is a diagram (cut-away) of the spindle assembly at the feed handle. Sorry it took so long to post.
BTW I drilled about 350 to 400 holes with this drill at the CFE show on Saturday and Sunday. I ran it at idle most of the time, but for demonstrations I increased the engine speed and drilled away.
Frank
BTW I drilled about 350 to 400 holes with this drill at the CFE show on Saturday and Sunday. I ran it at idle most of the time, but for demonstrations I increased the engine speed and drilled away.
Frank