Bar stock hit & miss recommendations sought

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dgjessing

Well-Known Member
Joined
Feb 16, 2010
Messages
295
Reaction score
9
So now that I've got a Webster under my belt :) I'm thinking I'd like to build a hit & miss engine. Relatively easy would be good... Ideas?
 
jerry howells farm boy is a good bar stock hit and miss and his plans are real good. you can get them on his web site his boy is still selling the plans.jonesie
 
The Kerzel would also be a good choice!
its free, has nice lines, fun to build and there are two other builds on this site to guide you.
I personaly would love to relive it with you.
The lock out lever can be tricky, but if you widen the bobben there is more room to play with.
But dont make the lever out of brass like I did :big:
Pete
 

Harold Depenbusch's hit and miss is another one to consider. I think the book with drawings
is available from Lindays and other sources.

Peter
 
Zero-Six from MEB is not bad. Build it from the drawings and it will look like this

http://www.floridaame.org/GalleryPages/g1h0252.htm

Or do as I did, keep it mechanically the same and just do a bit more work on the bar stock to make it look like castings & forgings.

07-10-1.jpg


J
 
There is also the "Odds 'n Ends" by Phil Duclos. Book it currently out of print from Village Press but plans are around somewhere.
 
Theres also Topsy Turvy by P Duclos.Harold has a fantastic build thread on here or if you like them smaller what about a Little Angel by Bob Shores the list is endless :big: what ever you decide on good luck.
Kind regards Frazer
 

Latest posts

Back
Top