I finally got my Arduino project finished.
The box is from Digi-Key. http://www.digikey.com/product-detail/en/CU-3283/377-1218-ND/428968
Button switches also from Digi-Key. http://www.digikey.com/product-search/en?vendor=0&keywords=eg1311-nd
Port for the Gecko connection.
This port was cut by hand as was the hole for the USB connector.
Many thanks to cfellows for the inspiration to start this project, and Gary Liming for his sketch. The switches are working with no modification to the sketch.
The box is from Digi-Key. http://www.digikey.com/product-detail/en/CU-3283/377-1218-ND/428968
Button switches also from Digi-Key. http://www.digikey.com/product-search/en?vendor=0&keywords=eg1311-nd
Port for the Gecko connection.
This port was cut by hand as was the hole for the USB connector.
Many thanks to cfellows for the inspiration to start this project, and Gary Liming for his sketch. The switches are working with no modification to the sketch.