gld

That’s 5 years lol….a lot of fun

Dual overhead cams 1" piston 1" stroke 5.5 to 1 compression ratio Thanks for looking Ray

Fixing the rub ... The bottom ends of the liners which stand .040" proud of the block created a couple thousandths interference with...

More Photos ...

Yes, I've used this on four of my engines and have been happy with the results. I didn't invent it - just offering an explanation of how...

Here is an link to a YouTube of a automatic thread stop that I made for my 13 x 40 Jet lathe. I actually don't know why most lathes do...

Does it respond perfect to the throttle: nope! Do I have the occasional short in the distributor : Yep! Is the timing perfect: nope! But...

Split bearings in a pressurized oil system, especially those with oil grooves, need a full 360 degrees of coverage around their journals...

About a week ago I was testing a file using Mach4. Evening came and I shut the computer off. Next morning I turn on the computer, launch...

Hello, I am a new member and thought I would share some pictures of my engines I have finished so far. They are all pretty good runners...

Hello My name is Lars and I would like to introduce myself First, I would like to thank everyone for so much help and tips over the...

Continuing on with the rods ... The bores for the small end bearings were drilled and reamed next. The bearings themselves were turned...

A) we the Machinist Group of Northeast Indiana want to thank all who attended! This truly was a great show. B) as of today I was...

thought this might be of interest to you.

Hi Peter195124 Go to RC Groups: OS FS 91 Surpass cam bearing removal - RC Groups. Post #8 has pictures of factory tool. Here are...