wheeltapper
Senior Member
- Joined
- Jun 25, 2010
- Messages
- 143
- Reaction score
- 14
Hi
I saw this in the latest issue of MEW and thought " what a good idea "
so here's my attempt at it.
heres the base with some clamps. the fence comes off for wider parts.
heres a small item clamped up.
and now the base is held in the saw vice.
the base will go to within 1/2 a mil of the blade.
Roy
I saw this in the latest issue of MEW and thought " what a good idea "
so here's my attempt at it.
heres the base with some clamps. the fence comes off for wider parts.
heres a small item clamped up.
and now the base is held in the saw vice.
the base will go to within 1/2 a mil of the blade.
Roy
