- Joined
- Jan 26, 2012
- Messages
- 162
- Reaction score
- 104
Made the flywheel ring today,went to my friends sheet metal shop and rolled a piece of brass 1/2" x 3/4" x 13" into a ring, looks prety bad,so I made a plug and pounded it round. Cleaned the butt and silver soldered it Turned the bore and the face and had to quit for the day
Turned face and ID
Cut grooves in center piece
Clamped fins and soldered
Looks prety nasty
Lots of fileing
Turned face and ID
Cut grooves in center piece
Clamped fins and soldered
Looks prety nasty
Lots of fileing
Attachments
Last edited: