Wanted 1/16” Steel or Iron Rivets

[fltenwheeler]

I need 3ea. 1/16” steel or iron rivets 7/16” or longer. Head style doesn’t matter.

I will take 25 of them so I can practice.

Thanks

Tim

 

[Sprocket]

Try American Model Engineering
Rivets - Scale Size - Round Head!
While that size is not currently available, at least they make the right size. I've used their brass rivets and liked them.
Maybe they could tell you when they will be back in stock. 3/32" steel rivets show as available if you could use that size
Doug

 

[Jasonb]

For just the three in your governor why not turn down a bit of 1/8" rod to 1/16" , cut off and shape the head yourself. If you have any 1/8" welding rod that is nice and soft and will pein over easily.

Even easier put a slight CSK either end of the hole in the ball and use 1/16" steel rod and just pein that over with a hammer and file flush as most governor don't have any head showing on the ball