doc1955 Gone Joined Aug 26, 2009 Messages 1,261 Reaction score 163 May 20, 2018 #1 Here is one of the stirling engines I've built this is the most recent one that I built. It starts running around 7 min mark.
Here is one of the stirling engines I've built this is the most recent one that I built. It starts running around 7 min mark.
S StudentT New Member Joined Jun 5, 2018 Messages 1 Reaction score 0 Jun 5, 2018 #2 Very nice. Are plans available from somewhere? I would like to build the same design, but smaller as I only have a Sherline lathe and mill.
Very nice. Are plans available from somewhere? I would like to build the same design, but smaller as I only have a Sherline lathe and mill.
Van Acker Gustaaf New Member Joined May 28, 2018 Messages 2 Reaction score 1 Location Belgium Jun 11, 2018 #3 A few years ago I made one as well, but not so nice. But powerful enough to drive something .
C crystalspec New Member Joined Apr 12, 2014 Messages 2 Reaction score 0 Jun 23, 2018 #4 I build one based on the planes in Home shop machinist. I still need to add a pully on the center shaft next to the flywheel to take power off.
I build one based on the planes in Home shop machinist. I still need to add a pully on the center shaft next to the flywheel to take power off.