Engine on the Fly

Shop deals on ebay
Find deals on amazon
Advertise with us
Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hi All,
Getting close now, Just have the head to rework(lap valves ect.) Also still waiting on the plug conector.

46.jpg
 
Annnnnd it runs, running on glow as I am still waiting on some ign parts. The cam sounds flat, may have to check the timing degs.
[ame]https://www.youtube.com/watch?v=klY84PgM-YA&feature=youtu.be[/ame]

Cheers
 
Excellent work Ghosty. This didn't take much time at all. Was that the first attempt at starting?
 
Second, Looked for a FS glow plug, non left, had to use a #8, does not run the same.

Cheers
 
Hi All,
After a bit of tuning.
Cheers
[ame]https://www.youtube.com/watch?v=hlnF89B5reU[/ame]
 
Hi All,
After checking the cam deg's, I have cut a new cam, here is the result, The carb is now at fault, that may be why in is in the box of bits, will look for another, I have a lot of spares

Cheers

[ame]https://www.youtube.com/watch?v=V3LFDbZ8GBI[/ame]
 
You must log in or register to reply here.

Similar threads

wce4
Finishing up my version of Arduino indexer for dummies.
Replies
17
Views
2K
wce4
wce4
comstock-friend
Stuart Steam Boiler Feed Pump (SBFP) - Stuart gasket material "Copperite" and "Oakenstrong"
Replies
4
Views
595
Peter Twissell
Peter Twissell
CFLBob
Anybody Using Rhino 8?
Replies
2
Views
699
Zeb
Zeb
Keith Thom
First post, Greetings
2
Replies
20
Views
1K
Apprentice707
Apprentice707
minh-thanh
What is your purpose in getting into the hobby of building model engines?
2 3
Replies
59
Views
4K
timo_gross
timo_gross

Latest posts

Back
Top