- Joined
- Jan 17, 2009
- Messages
- 1,081
- Reaction score
- 278
Mi first attempt at cutting spur gear.
Cut the first 60 teeth, takes 1.5 turns of the rotary table handle.
After cutting 60 teeth the 1.5 number is pretty burned into your brain.
Mount the 30 teeth blank and proceed to cut about 12 teeth cranking 1.5 turns.
Well you know that it take 3 turns to cut a 30 teeth gear.
Cut the first 60 teeth, takes 1.5 turns of the rotary table handle.
After cutting 60 teeth the 1.5 number is pretty burned into your brain.
Mount the 30 teeth blank and proceed to cut about 12 teeth cranking 1.5 turns.
Well you know that it take 3 turns to cut a 30 teeth gear.
but I've been down that road before. I feel the pain.
