Wilton power hacksaw model 5011

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

joe297

New Member
Joined
Jan 20, 2011
Messages
1
Reaction score
0
I acquired a Wilton power hacksaw model 5011 at the cabin fever show
If anyone has a manual, I would like to negotiate for a copy.
My prime question though, is "does it cut on the forward stroke (away from the motor) or the reverse stroke?"

Thank you
Joe297
 
Two ways to test it:

1) Put the blade in one way and test. if no go reverse the blade.

2) Observe the motion. If it lifts at one end that's the direction to cut.
 
Pretty well every power hacksaw cuts on the back stroke i.e. the end on which the crank is mounted.

Hope this helps

Best Regards
Bob
 

Latest posts

Back
Top