Here a white lead sub for dead centers and bevel gears in scroll chucks. (Do use on scroll side of chuck 5w or 10w)
FYI.
When used it only a coating do not pack chuck. Just use a soldering brush on the geat teeth. I little is all you need.
Dave
I used since the 1970's
https://www.kbctools.com/itemdetail/1-820-401
FYI.
When used it only a coating do not pack chuck. Just use a soldering brush on the geat teeth. I little is all you need.
Dave
I used since the 1970's
https://www.kbctools.com/itemdetail/1-820-401
Last edited:
