- Joined
- Jul 1, 2012
- Messages
- 475
- Reaction score
- 412
Hello All
Allow me to introduce my new four stroke engine Vimana .
Engine is machined from Aluminium castings .
Capacity 19.3 ccm
Version glow plug
Compression ratio 9/1
Bore / Stroke 24.8 mm/20 mm
I have designed patterns but Al was molded in small foundry
here in Slovakia.
I have use Liners, pistons, piston rings and carb. from ASP FS 61 engine.
These spare parts are quite cheap.
I have decided to build this engine as glow because it does not need
sensors, CDI ignition, distributor and engine temperature is much cooler .
Of course next one will be Spark plugs.
Have a nice day
Kadora
Allow me to introduce my new four stroke engine Vimana .
Engine is machined from Aluminium castings .
Capacity 19.3 ccm
Version glow plug
Compression ratio 9/1
Bore / Stroke 24.8 mm/20 mm
I have designed patterns but Al was molded in small foundry
here in Slovakia.
I have use Liners, pistons, piston rings and carb. from ASP FS 61 engine.
These spare parts are quite cheap.
I have decided to build this engine as glow because it does not need
sensors, CDI ignition, distributor and engine temperature is much cooler .
Of course next one will be Spark plugs.
Have a nice day
Kadora