basement_guy
Junior Member
- Joined
- Sep 29, 2012
- Messages
- 51
- Reaction score
- 14
This is my workingspace.
I have a lathe: emco compact 5
a milling colum that fits on the back of the lathe although mine is on a separate crosstable.
and a small drilpress
There is also a grinder and a vise fitted on a workbench. That is next to the mill.
Later I want to upgrade the cabinets.
I have a lathe: emco compact 5
a milling colum that fits on the back of the lathe although mine is on a separate crosstable.
and a small drilpress
There is also a grinder and a vise fitted on a workbench. That is next to the mill.
Later I want to upgrade the cabinets.
