Tap and reamer sizes for PM reaserch engines.

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

HenryBanjo

Active Member
Joined
Dec 6, 2021
Messages
32
Reaction score
3
Location
Auckland, New Zealand
Hi there,
Would anyone who has built the PM research #1 and #3 engines be able to tell me what sized taps and reamers I would need (Or their metric equivalents)
 
Hi,
I have made PM research #1 and #5 engines and used metric fasteners
I don't remember exactly but you will mostly require M2, M2.5 and M3 taps. Maybe M4 or M5 for the base.
Reamers would be 3mm, 5mm 8mm and 10mm.

regards
Nikhil
 

Latest posts

Back
Top