The factory steady for the Taig has too small a capacity for my requirements, so I had to get busy and build one with a little more room...
here are the parts after machining
after a lot of polishing, and assembly
installed on the lathe, with a piece of 1.5" aluminum just for show....
Interesting job, got to use my shiny new rotary table for the first time, looks like it will work OK.
Joe
here are the parts after machining
after a lot of polishing, and assembly
installed on the lathe, with a piece of 1.5" aluminum just for show....
Interesting job, got to use my shiny new rotary table for the first time, looks like it will work OK.
Joe