- Joined
- Aug 8, 2009
- Messages
- 930
- Reaction score
- 12
Howdy Guys and Gals (are there any gals out there?),
Well, I got the small wobbler running today and it's so cute! woohoo1 Impressed the wifey big time. I may get a rotary table out of this if I'm lucky. Pic is posted in Photos and Videos section. So now the question comes up:
How do you folks typically oil these smaller engines? I started by putting a little dab of light oil (Hopper's gun oil) in the oil well I created over the bearing/bushing on the crankshaft and put a dab where the connecting rod and crankshaft meet but I was thinking about the best method for getting it into the cylinder. Logic tells me to put a drop or two, maybe each time I run it, into the steam connector and from there it should find its way into the cylinder.
Am I on the right track?
-Trout
Well, I got the small wobbler running today and it's so cute! woohoo1 Impressed the wifey big time. I may get a rotary table out of this if I'm lucky. Pic is posted in Photos and Videos section. So now the question comes up:
How do you folks typically oil these smaller engines? I started by putting a little dab of light oil (Hopper's gun oil) in the oil well I created over the bearing/bushing on the crankshaft and put a dab where the connecting rod and crankshaft meet but I was thinking about the best method for getting it into the cylinder. Logic tells me to put a drop or two, maybe each time I run it, into the steam connector and from there it should find its way into the cylinder.
Am I on the right track?
-Trout