Les Chenery Gnome ball bearing

[Rudirk]

Hallo, could someone tell me where I can buy the bearings for the gnome ? The label in the plan is klnj 5/8 RHP . Thanks Rudi

 

[Cogsy]

Any bearing supply company should be able to get one in for you, or have one in stock. Buy a reputable brand, (RHP is the brand quoted and is a good one) rather than a cheap copy off ebay. Just be aware that a sealed (2RS) or shielded (Z or 2Z) version of this bearing will be wider than the open version. Open is 9/32" wide, sealed or shielded is 11/32" wide. Most bearings are the same width whether open or sealed (apart from very small sizes) but this one is not.

 

[SmithDoor]

The best place to find ball bearing is Ebay or Auto Stores
http://www.mcmaster.com/#6384k76/=x7ze5y
Bad news 10 years ago I was buying this bear for less than a $1.00 each at whole sale.

Good luck
Dave

Hallo, could someone tell me where I can buy the bearings for the gnome ? The label in the plan is klnj 5/8 RHP . Thanks Rudi

 

[Charles Lamont]

Hallo, could someone tell me where I can buy the bearings for the gnome ? The label in the plan is klnj 5/8 RHP . Thanks Rudi

http://www.eibtron.com/Kugellager-KLNJ-5/8

 

[petertha]

I suspect you will find something closer to home, but this is a pretty good place too to compare.

http://www.vxb.com/ballbearings.html?gclid=CJ6NydnA1b8CFUFsfgodxVcA3w

 

[Rudirk]

Thank's for the answers. So I find a store to buy it. Rudi