- Joined
- Jul 1, 2012
- Messages
- 475
- Reaction score
- 412
Hello friends
I am four stroke enthusiast but one year ago I successfully finished two cylinder steam engine.
I run engine on live steam roughly 30 minutes then I had to turn to different project so I
put engine on the shelf .
Last weekend I had spare time so I decided to check steam engine and I have found out black spots
on inner liner surface. These spots are probably corroded but they are dark black not rusty red.
I machined liners from unknown ferrous material .
Steam gurus my question is : What should by done before steam engine is stored.
Should I run engine on compressed air to remove all condensed water from engine or you have
a different remedy.
Thank you very much for your help.
I am four stroke enthusiast but one year ago I successfully finished two cylinder steam engine.
I run engine on live steam roughly 30 minutes then I had to turn to different project so I
put engine on the shelf .
Last weekend I had spare time so I decided to check steam engine and I have found out black spots
on inner liner surface. These spots are probably corroded but they are dark black not rusty red.
I machined liners from unknown ferrous material .
Steam gurus my question is : What should by done before steam engine is stored.
Should I run engine on compressed air to remove all condensed water from engine or you have
a different remedy.
Thank you very much for your help.