Philjoe5
Well-Known Member
- Joined
- Jul 12, 2007
- Messages
- 1,727
- Reaction score
- 321
Rob,
I haven't checked out the trueness of the x axis extensively. However, I milled and drilled the 6" long support arms for the walking beam engine I'm working on with the G0704.
They fit fine, so the machine is performing to my degree of accuracy and precision over that distance.
Cheers,
Phil
I haven't checked out the trueness of the x axis extensively. However, I milled and drilled the 6" long support arms for the walking beam engine I'm working on with the G0704.
They fit fine, so the machine is performing to my degree of accuracy and precision over that distance.
Cheers,
Phil