govenor casting

Discussion in 'Engines From Castings' started by sawyer massey, Oct 16, 2019.

Help Support HMEM by donating:

  1. Oct 16, 2019 #1

    sawyer massey

    sawyer massey

    sawyer massey

    Active Member

    Joined:
    Sep 27, 2009
    Messages:
    35
    Likes Received:
    10
    Here is the pattern and the core for a 1\3 govnor hope IMG_20191015_200957.jpg to pour on the weekend IMG_20191015_201024.jpg
     
    Jack3M likes this.
  2. Oct 19, 2019 #2

    sawyer massey

    sawyer massey

    sawyer massey

    Active Member

    Joined:
    Sep 27, 2009
    Messages:
    35
    Likes Received:
    10
    IMG_20191019_182353.JPG Well that worked well
     

    Attached Files:

  3. Oct 20, 2019 #3

    aka9950202

    aka9950202

    aka9950202

    Active Member

    Joined:
    Oct 25, 2010
    Messages:
    43
    Likes Received:
    11
    Nice work. Did you use silica sand and water glass for the core?

    Cheers,

    Andrew in Melbourne
     
  4. Oct 21, 2019 #4

    sawyer massey

    sawyer massey

    sawyer massey

    Active Member

    Joined:
    Sep 27, 2009
    Messages:
    35
    Likes Received:
    10
    I use silaca sand a binder and Gardner a friend gave me goes of the weight of the sand
     
  5. Dec 16, 2019 #5

    sawyer massey

    sawyer massey

    sawyer massey

    Active Member

    Joined:
    Sep 27, 2009
    Messages:
    35
    Likes Received:
    10
    Finely got them finished
     

    Attached Files:

  6. Jan 14, 2020 at 5:54 PM #6

    oldCB

    oldCB

    oldCB

    Member

    Joined:
    Mar 20, 2015
    Messages:
    7
    Likes Received:
    1

    Nice work!
     

Draft saved Draft deleted

Share This Page