• If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Eagle 5c Collet Chuck - SOLD

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BillH

Well-Known Member
Joined
Dec 11, 2008
Messages
152
Reaction score
1
Hello all, I am selling my Eagle 5c Collet chuck.
The picture shows the chuck with a backplate to fit it to a Lathemaster 8x14 lathe.
I am asking 100$ for the chuck, and if you want the backplate as well, 120$ for both, + shipping.
This is the 5c chuck that Lathemaster sells.
I used this chuck only once and looks almost new.
Thanks, Bill Holland
5cChuck.jpg
 
Naples, FL. I'll have to check the threads but my memory tells me they are 8mm diameter, course thread, boltcircle for a Lathemaster 8x14
 
Bill

I will take the chuck. PM me with info for shipping and payment details.
What I meant for the threads was the spindle thread size on the back plate. I have a Logan with 1 1/2" x 8 spindle threads and if your backing plate has this size thread i will take it too.
Thanks
Allen
 
The backplate is not for a threaded spindle.
The chuck is in process of being sold, awaiting payment.
 
Back
Top