"Double Scotch" steam engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rhitee93

Project of the Month Winner!!!
Project of the Month Winner
Joined
Mar 13, 2012
Messages
583
Reaction score
62
About 12 years ago, I came across a set of plans on the internet for a small bar stock steam engine. The engine used a twin scotch-yoke arrangement, and the designer called it the “Double Scotch”.

I’d like to take a look at that design again, but I can’t find the plans I had. I am pretty sure they were available for free at the time. I remember drawing some of the parts up in anticipation of using our CNC mill to cut them, but everything seems to be gone now.

Does anyone happen to be familiar with this engine?
 
Brian, google must have heard your plea and sent out a spider to search it out :big:
Its a nice little engine from the looks of it so I'm glad you found it.

Bill
 
I started this one, but never finished it. I'd highly recommend that you scale it up a little to save your sanity.
 
looks like a slightly embellished version of a PM research 3A aluminium engine. the kit is $60 msrp a 3BI bronze and iron is $72 or 138 for one machined at the factory.
 
I did a single-scotch version of that one years ago - runs very well. It had the air inlet leading to a slot on the crankshaft that acted as the valve. I think the plans for that one were part of the jon-tom collection online.
 

Latest posts

Back
Top