Rudirk
Well-Known Member
- Joined
- Nov 27, 2012
- Messages
- 85
- Reaction score
- 25
Hallo,I have a problem to mill the radius R 14 of the combustor.
Here are photos of my head.
Kopf1.jpg
Kopf2.jpg
CAM00861.jpg
First I want to bore with different milling cutter the right deep.
Then I will turn a disc with R 14 and all angels to be need to mill aluminium.
Then I want to make a hlf disc and put it into my boring head to finish the R 14.
I hope you could understand my problem.![Roll Eyes :rolleyes: :rolleyes:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Is this the right way ?
dear Rudi
Here are photos of my head.
Kopf1.jpg
Kopf2.jpg
CAM00861.jpg
First I want to bore with different milling cutter the right deep.
Then I will turn a disc with R 14 and all angels to be need to mill aluminium.
Then I want to make a hlf disc and put it into my boring head to finish the R 14.
I hope you could understand my problem.
dear Rudi
![Kopf1.jpg Kopf1.jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/34/34381-Kopf1.jpg)
![Kopf2.jpg Kopf2.jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/34/34382-Kopf2.jpg)
![CAM00861.jpg CAM00861.jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/34/34383-CAM00861.jpg)