Carbide Inserts

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

neptune769

Active Member
Joined
Feb 9, 2012
Messages
26
Reaction score
1
Hello All,
I was given 7 Carbide Insert Turning tools. Well the only inserts that I have for them are the one on the tools. I have no idea what the part numbers are to get more when they need replacing. So I googled Carbide Insert Identification and found this PDF. I thought that maybe some of you could use this. Hope this helps someone.

http://www.ccpa.org/pdf/B212_4.pdf

Regards,
Dennis L.
 
Hey :eek: I just noticed I got my first Karma point. I wonder what I did to deserve this. Thank you to the person that gave it to me.
 
Yahoo I just found a Karma point too, I to don't know what I did to deserve one, but I'm not complaining.
Many thanx to somebody.
Cheers
Graham :bow: ;D
 
If you come up with something of interest (model engineering related), helpful or just a good build post, people will give Karma points, purely because you are trying to help other people in their efforts.

I just wish we could give negative ones for a lot of the silly posts and questions we seem to be getting lately.


John
 

Latest posts

Back
Top