- Joined
- Jul 29, 2008
- Messages
- 560
- Reaction score
- 62
Well I love radials so I'm off on another quest. I have a plan not sure if it is a good plan,but at least its a plan. I have built three of Rudy's Radial five's and one radial 10 based off of Rudy's radial five. So here is the plan : I am going to attempt an as close as possible 1/2 scale of the Radial five. I plan on doing most at true 1/2 scale but some areas will need to be changed to accommodate the 0-80 bolts I plan to use. I have several parts made already some made more than once :big:. That is when the plan changed ??? I figured why make just one :big:, So I'm making 3.
Here are a few pictures of what I have done.
This is the full size cylinder
Here are the Half size and the full size together
Here is the half size cylinder with the head
Here are the 3 body,nose cones and valve body blanks
Till I have more done thanks for taking a look
Dave
Here are a few pictures of what I have done.
This is the full size cylinder
Here are the Half size and the full size together
Here is the half size cylinder with the head
Here are the 3 body,nose cones and valve body blanks
Till I have more done thanks for taking a look
Dave