I have a planned project that I am working on that requires a 3.5" deep x 7/8 bore.
This bore size is not real critical, as the mating part can be changed, but the taper of the bore can not be more than about .0002"
I can lap that straight....but how do I measure the bore accurately?...in the home shop environment......suggestions
I'm thinking a plug gage...but what say you?
Dave
This bore size is not real critical, as the mating part can be changed, but the taper of the bore can not be more than about .0002"
I can lap that straight....but how do I measure the bore accurately?...in the home shop environment......suggestions
I'm thinking a plug gage...but what say you?
Dave