x2 taper removal help.

[lensman57]

Hi,

Glad things worked out for you, if the draw bar has been bent then I would seriously examine the arbor for any damage or misalignement, the price of an MT3 arbor is a lot less than the spindle and the bearings. Good luck.

Regards,

A.G

 

[Speedy]

Hi,

Glad things worked out for you, if the draw bar has been bent then I would seriously examine the arbor for any damage or misalignement, the price of an MT3 arbor is a lot less than the spindle and the bearings. Good luck.

Regards,

A.G

all seemed fine on initial inspection, I will have another look. the arbors on these seem pretty beefy.