I have a bunch of Sandvik and Kennametal TopNotch inserts, plus a few other types I am looking for new homes for. I would prefer to trade for other tooling...taps, endmills, drills, what have you got more of than you need? Here are the pics, let's do some trading.
I am located in Ponca City, OK [email protected]
Here we go:
Lot #1
10 Kennametal Top Notch assorted inserts, left hand, TiN coated. Some square, some radiused, all have at least 1 good cutting surface.
Lot #2
8 assorted Kennametal Top Notch inserts, right hand, TiN coated. Some square, some radiused, all have at least 1 good cutting surface.
Lot #3
7 Kennametal Top Notch assorted inserts, right hand, uncoated. Some square, some radiused, all have at least 1 good cutting surface.
Lot #4
15 Kennametal Top Notch assorted inserts, left hand, uncoated. Assorted size radiused, all have at least 1 good cutting surface.
Lot #5
Box full of parting tool blades.
2 new P3 1/8 x 11/16 x 5
1 new P4W 5/32 x 3/4 x 5
1 Somma Superkut 1/4 x 7/8 ground once on each end
Many assorted P3 sections in HSS and Cobalt.
Lot #6
15 unknown TiN coated milling inserts. 2 sided c'sunk hole, all are in as-new condition.
Lot #7
Sandvik turning holder with 3 inserts.
Lot #8
9 assorted Sandvik top notch assorted inserts, left and right hand, coated and uncoated. Assorted size radiused, plus 1 left hand threader. All have at least 1 good cutting surface.
Lot #9
This is a good one!
29 assorted Kennametal Top Notch inserts, left and right hand, coated and uncoated. Assorted size radiused and square groovers, plus a few threaders mixed in.
Lot #10
5 assorted Sandvik top notch uncoated inserts.
3 left hand radiused, like new.
1 right hand threading insert, like new.
1 right hand radiused, 1 good end.
Lot #11
Another big one.
15 assorted TiN coated Sandvik top notch inserts as follows:
8 right hand square groovers, all in VG+ condition
2 right hand threaders, 3 good ends total.
3 right hand assorted groovers, radisued and square, 5 good ends total.
2 left hand groovers, 1 radisued 1 square (has been side ground).
I am located in Ponca City, OK [email protected]
Here we go:
Lot #1
10 Kennametal Top Notch assorted inserts, left hand, TiN coated. Some square, some radiused, all have at least 1 good cutting surface.
Lot #2
8 assorted Kennametal Top Notch inserts, right hand, TiN coated. Some square, some radiused, all have at least 1 good cutting surface.
Lot #3
7 Kennametal Top Notch assorted inserts, right hand, uncoated. Some square, some radiused, all have at least 1 good cutting surface.
Lot #4
15 Kennametal Top Notch assorted inserts, left hand, uncoated. Assorted size radiused, all have at least 1 good cutting surface.
Lot #5
Box full of parting tool blades.
2 new P3 1/8 x 11/16 x 5
1 new P4W 5/32 x 3/4 x 5
1 Somma Superkut 1/4 x 7/8 ground once on each end
Many assorted P3 sections in HSS and Cobalt.
Lot #6
15 unknown TiN coated milling inserts. 2 sided c'sunk hole, all are in as-new condition.
Lot #7
Sandvik turning holder with 3 inserts.
Lot #8
9 assorted Sandvik top notch assorted inserts, left and right hand, coated and uncoated. Assorted size radiused, plus 1 left hand threader. All have at least 1 good cutting surface.
Lot #9
This is a good one!
29 assorted Kennametal Top Notch inserts, left and right hand, coated and uncoated. Assorted size radiused and square groovers, plus a few threaders mixed in.
Lot #10
5 assorted Sandvik top notch uncoated inserts.
3 left hand radiused, like new.
1 right hand threading insert, like new.
1 right hand radiused, 1 good end.
Lot #11
Another big one.
15 assorted TiN coated Sandvik top notch inserts as follows:
8 right hand square groovers, all in VG+ condition
2 right hand threaders, 3 good ends total.
3 right hand assorted groovers, radisued and square, 5 good ends total.
2 left hand groovers, 1 radisued 1 square (has been side ground).