Time for a trivia question

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Cool , Thanks for sharing that, are you going to publish that?

Dave
 
Good luck with the Dentist...some of my trips haven't been so pleasant..hope yours are better.

Dave
 
When I get it finished, probably publish on here, as a pdf.
It was just that some guys wanted to design their own, and asked how to do it, and it is not until one puts pen to paper that you suddenly have no idea how you did that and it just happend to come out right.

It is just a real worry if you get something not quite right, then it won't be too clever.

Dave
 
Well the old saying rings true, if you really want to know how to do something...teach it to someone else.. :)

One bite at a time Dave

Dave
 
A dentist uses an Apex meter - something they sometimes use when doing root canal treatment.
 
Rof}

I'm so sorry to hear that.....Make sure he gives you the good stuff first OK...

Dave
 
Dave,

That is so true, I had to teach magnetism to some first year students, I think I learnt a lot more than they did.

Dave
 
Never waste a trip to the dentist!

The barbs and burrs they use are usually carbide
In this state, they can't reuse them on someone else and will usually
give them to you if you ask nicely. ;)

Rick


 
FWIW, you will be doing extremely well to hit 2 PSI with lung pressure.
 
rake60 said:
Never waste a trip to the dentist!

The barbs and burrs they use are usually carbide
In this state, they can't reuse them on someone else and will usually
give them to you if you ask nicely. ;)

Rick


UUUUUUGH! That's gross in a cool kinda way..... ??? ;D

Dave
 
shred said:
FWIW, you will be doing extremely well to hit 2 PSI with lung pressure.

I can hit 1.8, and that's a lot more than most people that have tested. But it's enough to run my rocker quite well.
 
Quote I can hit 1.8, and that's a lot more than most people that have tested.

Well blow me down Rof} Rof} Rof}
Dave
 

Latest posts

Back
Top