Tee head engine new member

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 6, 2023
Messages
6
Reaction score
7
Location
Minnesota
hello , i am new member, last summer i built a webster engine, and decided after that i would design my own engine, i started in cad drawing up on dec 25 2023,
and what i ended up with is this, this last saturday evening i tried starting it , and it ran, !! yay
there is lots to do, yet , gas tank, cooling fines, electric start, etc . and more tuning on carb.
this was my first time making gears, . thanks to roy for cdi!
lots to do yet ,
.875 bore
1.24 stroke
2 cast iron ring
cylinder steel liner, and is pinned at base to aluminum
s&s cdi ignition
.094 valve stems,
.250 valves
.375 crank pinned , keyed 3/32 and 3/8-24 threaded on flywheel side
thanks for taking your time to look at
Dan from northfield mn, usa.
 

Attachments

  • 72919167841__E35122EA-D64E-46B1-BAC6-44555D3B0842.jpg
    72919167841__E35122EA-D64E-46B1-BAC6-44555D3B0842.jpg
    1.3 MB
  • IMG_8094.jpg
    IMG_8094.jpg
    890.2 KB
  • IMG_8096.JPG
    IMG_8096.JPG
    398.7 KB
  • IMG_8184.MOV
    20.6 MB
  • IMG_7979.JPG
    IMG_7979.JPG
    326.8 KB
  • IMG_8164.jpg
    IMG_8164.jpg
    2.4 MB
  • IMG_8208.jpg
    IMG_8208.jpg
    1.5 MB
  • IMG_8209.jpg
    IMG_8209.jpg
    1.4 MB
  • IMG_8210.jpg
    IMG_8210.jpg
    1.4 MB
  • 72775094237__58940A3D-65C3-462D-9FB3-F24E5952B841.MOV
    13.4 MB
hello , i am new member, last summer i built a webster engine, and decided after that i would design my own engine, i started in cad drawing up on dec 25 2023,
and what i ended up with is this, this last saturday evening i tried starting it , and it ran, !! yay
there is lots to do, yet , gas tank, cooling fines, electric start, etc . and more tuning on carb.
this was my first time making gears, . thanks to roy for cdi!
lots to do yet ,
.875 bore
1.24 stroke
2 cast iron ring
cylinder steel liner, and is pinned at base to aluminum
s&s cdi ignition
.094 valve stems,
.250 valves
.375 crank pinned , keyed 3/32 and 3/8-24 threaded on flywheel side
thanks for taking your time to look at
Dan from northfield mn, usa.
Congratulations on a job well done.

Dave
 
Back
Top