steam dome base on A-3 switcher 3/4 scale

Help Support HMEM:

kwoodhands

Well-Known Member
Joined
Jan 4, 2010
Messages
97
Reaction score
18
Location
mays landing NJ.
I have Kozo's A-3 Switcher but cannot read all of the dimensions for the steam dome base. This on page 135 that is the fold out page. The steam dome base is in the crease and some of the dimensions are obliterated.
Could someone post the image or even a sketch for me. I built the locomotive about 8 years ago and it only runs on air as my hard soldering was lousy at that time. I hope to be able to complete a good boiler this time.
I'm okay with the rest of the dimensions.
thanks mike
 

kwoodhands

Well-Known Member
Joined
Jan 4, 2010
Messages
97
Reaction score
18
Location
mays landing NJ.
I have Kozo's A-3 Switcher but cannot read all of the dimensions for the steam dome base. This on page 135 that is the fold out page. The steam dome base is in the crease and some of the dimensions are obliterated.
Could someone post the image or even a sketch for me. I built the locomotive about 8 years ago and it only runs on air as my hard soldering was lousy at that time. I hope to be able to complete a good boiler this time.
I'm okay with the rest of the dimensions.
thanks mike

I have the information I needed thanks to Crueby a member of another machinist forum.

mike
 

Latest posts

Top