Naiveambition
Well-Known Member
- Joined
- May 15, 2012
- Messages
- 369
- Reaction score
- 95
I'm in the process of installing dro on my mill, and now the z axis. My ? Is pertaining to the need for the collar. I know that it is used mainly for depth stop, but since I never use it I'm thinking of lobbing of the front to gain some vision clearance. I have back issues that make it hard to bend over, and while milling, the front of the collar is always blocking my vision, and severely limits my time to machine working around it.
My plan is to use the rear of the collar for my dro, but take off a good chunk of the front. see photo. (The cross hatch area) . Does anyone see an issue that I'm not. Has anyone done this before and what were your results. Does it serve a purpose other than depth stopping
I have the rong fu clone 45 mill drill
My plan is to use the rear of the collar for my dro, but take off a good chunk of the front. see photo. (The cross hatch area) . Does anyone see an issue that I'm not. Has anyone done this before and what were your results. Does it serve a purpose other than depth stopping
I have the rong fu clone 45 mill drill