Simplified Scotty

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SignalFailure

Well-Known Member
Joined
Jan 1, 2008
Messages
366
Reaction score
3
Here's my latest and almost complete engine - a simplified Elmer's Scotch yoke/rotary valve.

Just need to block up the hole on the end of the frame, remove the boss on the flywheel (don't ask!), maybe shape the bracket and make some screws for it. It's all steel and brass except the cylinder which is cast iron.

Probably a little different to the original in proportion too as I converted the plans to metric.

If it runs ok I'm going for a supersize version ;)

srv.jpg
 

Latest posts

Back
Top