Sshire
Well-Known Member
- Joined
- Jun 29, 2011
- Messages
- 936
- Reaction score
- 259
I got a new Bison Set Tru 5C chuck a few months ago. UPS will deliver the 1-3/4 x 8 backplate today (don't ask)
Any tips, suggestions, etc for aligning the Set Tru. My thought is to put the BestTest DTI on the ID (where the collets insert) and doing pretty much what I do when setting up a part in the 4jaw. (zero the indicator, rotate the chuck 180, adjust 1/2 of the difference, rinse and repeat until the error is within whatever)
The Set Tru doesn't not have the adjustment screws 180 apart. Any help is appreciated.
Best
Stan
Any tips, suggestions, etc for aligning the Set Tru. My thought is to put the BestTest DTI on the ID (where the collets insert) and doing pretty much what I do when setting up a part in the 4jaw. (zero the indicator, rotate the chuck 180, adjust 1/2 of the difference, rinse and repeat until the error is within whatever)
The Set Tru doesn't not have the adjustment screws 180 apart. Any help is appreciated.
Best
Stan