Fluffy
Well-Known Member
G'Day All,
Just a few pics showing the progress of the Bonza hit & miss to date.
Flywheels have been machined from Ø170 BMS without the hubs. The hubs were turned & fitted as separate parts. This was done to avoid mountains of swarf. Body was cut from 12mm Al. plate. All surface finishes at this time are as machined, no polishing etc yet.
Regards,
Don.
Just a few pics showing the progress of the Bonza hit & miss to date.
Flywheels have been machined from Ø170 BMS without the hubs. The hubs were turned & fitted as separate parts. This was done to avoid mountains of swarf. Body was cut from 12mm Al. plate. All surface finishes at this time are as machined, no polishing etc yet.
Regards,
Don.