New guy, been lurking for some time.

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Paul Erland

Member
Joined
Aug 28, 2009
Messages
9
Reaction score
0
Hello folks,

My name is Paul and I just wanted to introduce myself. I've been sitting in the background reading and soaking up information. I have an interest in gas engines, primarily hit and miss but throttle governed. I also have an interest in sleeve valve engines.

Don't have much in the shop. Just a little 6" atlas lathe, which needs some TLC, and a charcoal foundry.

I'm a full time fireman and have 5 kids. I live in the Santa Barbara, California area. Needless to say, shop time can be limited at times. Hope to start contributing and interacting with the folks here. Let me thank you all now for all that I have already learned from your projects and discussions.

Paul
 
Welcome Paul!

Glad your Here! Jump in the waters fine! ;D

Dave
 
Welcome, Paul. Nice to have you aboard. wEc1

Regards,
Rudy

 
wEc1 Paul

Jump right in as the others are saying.

Regards
Gordy
 
Hi Paul

Welcome to the group from another Paul

Cheers Paul wEc1
 
Let me add my welcome as well Paul.

Bill
 
Paul,

Welcome to our forum. wEc1

Best Regards
Bob
 
Paul, Welcome,to the forum. Enjoy and ask if you have any questions. larry
 
Welcome to the forum Paul. There's good stuff in here ;)

Cheers,
Phil
 

Latest posts

Back
Top