N nsfr1206 Well-Known Member Joined Nov 9, 2011 Messages 83 Reaction score 0 Feb 14, 2012 #1 Hi I am looking for someone that might have two reamers that they want to get rid of. Thought I would check here. Need a .382 and a .465. HSS is fine. Will buy or trade...Thanks, David.
Hi I am looking for someone that might have two reamers that they want to get rid of. Thought I would check here. Need a .382 and a .465. HSS is fine. Will buy or trade...Thanks, David.
S steamer Well-Known Member Joined Nov 30, 2007 Messages 5,388 Reaction score 29 Feb 14, 2012 #2 You could make your own.... http://www.homemodelenginemachinist.com/index.php?topic=9854.0 Either buy a decimal drill blank.....the sizes you state are odd ball so probably not. Or turn one up out of oil hardening and have at it. Dave
You could make your own.... http://www.homemodelenginemachinist.com/index.php?topic=9854.0 Either buy a decimal drill blank.....the sizes you state are odd ball so probably not. Or turn one up out of oil hardening and have at it. Dave
rake60 Well-Known Member Joined Jul 8, 2007 Messages 4,756 Reaction score 124 Feb 14, 2012 #3 Have you considered a couple of adjustable reamers? Here's a link to Enco's current availability. (Middle right of the page.) They are inexpensive and can be adjusted for the range listed. Rick
Have you considered a couple of adjustable reamers? Here's a link to Enco's current availability. (Middle right of the page.) They are inexpensive and can be adjusted for the range listed. Rick
MachineTom Senior Member HMEM Supporting Member Joined Oct 20, 2010 Messages 913 Reaction score 132 Feb 14, 2012 #4 MSC has both sizes as chucking reamers $30 +