panofish
Well-Known Member
- Joined
- Mar 8, 2012
- Messages
- 57
- Reaction score
- 3
Brazing is fun and not too difficult for basic steel to steel and aluminum to aluminum.
You just need a torch with good high heat, like oxygen and gas for steel and propane can be sufficient for aluminum.
Silver solder is easier than bronze rods for steel but bronze rods are cheaper.
The aluminum brazing rods are cheap and are very easy because they don't need as much heat.
Here is a video I shot of my learning experience with brazing...
[ame]http://www.youtube.com/watch?v=WeRPdVDCLyk[/ame]
You just need a torch with good high heat, like oxygen and gas for steel and propane can be sufficient for aluminum.
Silver solder is easier than bronze rods for steel but bronze rods are cheaper.
The aluminum brazing rods are cheap and are very easy because they don't need as much heat.
Here is a video I shot of my learning experience with brazing...
[ame]http://www.youtube.com/watch?v=WeRPdVDCLyk[/ame]