jcreasey
Well-Known Member
- Joined
- Jun 20, 2015
- Messages
- 56
- Reaction score
- 124
After 4 years I of tinkering I finally got my steam plant to the point where it can do something. I hesitate to say it's finished because I am still thinking of things to add.
I made most of it myself with the exception of the safety valves, pressure gauge, and a couple of the other fittings. The smaller safety valve and the main stop cock were purchased from Burnaby Bolton in 1968 by the previous owner of my lathe.
I made most of it myself with the exception of the safety valves, pressure gauge, and a couple of the other fittings. The smaller safety valve and the main stop cock were purchased from Burnaby Bolton in 1968 by the previous owner of my lathe.
Attachments
-
IMG_6869.jpeg2.7 MB · Views: 5
-
IMG_6868.jpeg2.5 MB · Views: 0
-
IMG_6867.jpeg3.6 MB · Views: 0
-
IMG_6866.jpeg3.7 MB · Views: 0
-
IMG_6865.jpeg3.6 MB · Views: 0
-
IMG_6864.jpeg3.8 MB · Views: 0
-
IMG_6863.jpeg4 MB · Views: 0
-
IMG_6862.jpeg5.5 MB · Views: 0
-
IMG_6861.jpeg2.5 MB · Views: 0
-
IMG_6851.mov37.8 MB