Mill illumination

[gunboatbay]

For those of you with smaller mills, this is an interesting lighting system:

]www.homemodelenginemachinist.com//f1.grp.yahoofs.com/v1/UJYaSuhiVZco0H9KJClgf77CXvlVbdlPXXLC2qQmo56kVg61G0LBrVX-LUOge3XVKx6FET-y1as8MKPJD_ME15YieFln8pM6/LightUpYouMill.pdf]

 

[gbritnell]

I don't usually have computer problems but when I click on the link it says this document is unaccessable.
gbritnell

 

[RobWilson]

hi gbritnell its an adobe PDF file
Rob

 

[John S]

I get the same, not accessible but I can read pdf's with no problem.

Tried with firefox and IE

 

[Noitoen]

Same here even tried to copy/paste the url with no luck.

 

[GailInNM]

It opened for me soon after it was posted this morning, but does not open now. Maybe try again later.
Gail in NM,USA

 

[websterz]

Try this:

http://f1.grp.yahoofs.com/v1/kM4aSj...AhMRZotADGHwS-lffcMLO4fEJQ/LightUpYouMill.pdf

It works fine for me. Maybe you have to be a member of the group to access the file? At any rate it is an interesting solution. I ordered the parts to build my own this morning. ;D

 

[Noitoen]

Now it works

 

[RobWilson]

Stop working for me ???

 

[kustomkb]

Here is the duscussion, don't know where pdf is tho.

http://groups.yahoo.com/group/mill_drill/message/23956

 

[rudydubya]

Good info on the LED lights, I've been looking for a good lighting solution.

The PDF file is still there, in the "Files" at the left. Apparently you have to be a member of the group and logged in to access the files.

Rudy

 

[stevehuckss396]

I was telling the guy's in the Yahoo group that my pal used velcro to secure an umbrella light to the quill if his micro mill. The velcro makes it easy to change batterys. There are many different types out there for around 10 bucks. I have also seen rechargable units.

 

[gunboatbay]

I didn't have any trouble opening/downloading the file, but for those of you that did (and want to view it), I've attached it below:

View attachment LightUpYouMill.pdf

 

[cobra428]

Here's a cool light for a mill

http://littlemachineshop.com/products/product_view.php?ProductID=3015&category=

I bought one of these to modify. Remove neck lens and cover walla

http://www.amazon.com/dp/B000IOP1I4/?tag=skimlinks_replacement-20

Tony

 

[Dunc]

Remove the square bracket ([ ]) at each end of the url