Merlin need help

[LeRhone]

Hi I am building the 1/4 scale Merlin from a set of castings I purchased from a guy that did not have the equipment to make it.
I need some help withe the gears in the gear case as some of the plans are missing.

 

[mayhugh1]

https://www.homemodelenginemachinist.com/threads/quarter-scale-merlin-v-12.24153/

 

[peterl95124]

the person that designed and made the castings for that kit is Richard Maheu, if you still need plans I can probably pass on to you his contact info.

 

[LeRhone]

peter195124 all I need is a list of the gears that go into the gear box.
Thanks

 

[peterl95124]

peter195124 all I need is a list of the gears that go into the gear box.
Thanks

there's two gears in the propellor reduction gearbox up front,
there's a multitude of gears in the "wheelcase" (Rolls Royce term) in the back,
you probably need to know both, but you should be clear what you're asking for


PS, I highly recommend stripping all the black paint off, IMHO this looks terrible not only on a model but also on engines that are in museums, and the reason/logic behind black paint doesn't apply to models or museum pieces, IMHO, YMMV, VWPBL, yada, yada, yada...

 

[LeRhone]

I am after the gears in the wheel case