Machining Textbook

[joeby]

While digging through some books (looking for something where it SHOULD be again), I stumbled upon some of my textbooks from trade school.

This one is titled "General Industrial Machine Shop" by Harold V. Johnson, 3rd edition, 1979, ISBN 87002-293-8.

The book covers layout, inspection, milling, shaping, just about all basic shop stuff. It's in very good condition.

If anyone can use it, it's yours for $5.00 and actual shipping costs.

Kevin

 

[ctmillworks]

do you still have the book if so let me know
at [email protected]

 

[Speedy]

I have been looking for a machining book for while.
is this good for a newb? I could really use this if the ctmillworks above passes.

do you have a link to the book on the net? (just so I can take a look)

 

[joeby]

Sorry for the delayed reply. I had forgotten that I had posted the book here.

Unfortunately, that book is long gone.

I was clearing out my trade school textbooks and, while that one has been sold, I still have this one:

http://www.amazon.com/Machine-Tool-Technology-Victor-Repp/dp/0026715708/ref=sr_1_1?ie=UTF8&s=books&qid=1239876520&sr=1-1

Hardcover, very good condition. I would like to get $30 for it.

Thanks,

Kevin