rake60
Well-Known Member
- Joined
- Jul 8, 2007
- Messages
- 4,756
- Reaction score
- 124
If your looking for a first engine you might what to give this site a look.
It is run my Professor Nial McCabe of the County College of Morris.
http://npmccabe.tripod.com/steam.htm
My very first running steam engine was the McCabe Runner.
It was built with a drill press. That's ALL!
No lathe or mill. It runs good! A noisy little thing.
<embed src="http://www.rake60.com/photogallery/Model_Steam_Running.mpeg" autoplay="false" hidden="false" loop="false" type="application/mediaplayer" wmode="transparent" width="350" heigth="425"></embed>
http://www.rake60.com/photogallery/Model_Steam_Running.mpeg
Rick
It is run my Professor Nial McCabe of the County College of Morris.
http://npmccabe.tripod.com/steam.htm
My very first running steam engine was the McCabe Runner.
It was built with a drill press. That's ALL!
No lathe or mill. It runs good! A noisy little thing.
<embed src="http://www.rake60.com/photogallery/Model_Steam_Running.mpeg" autoplay="false" hidden="false" loop="false" type="application/mediaplayer" wmode="transparent" width="350" heigth="425"></embed>
http://www.rake60.com/photogallery/Model_Steam_Running.mpeg
Rick