Hi from eastern Norway.

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

M130

Member
Joined
Apr 5, 2012
Messages
16
Reaction score
5
Location
Tynset, Norway
Hi everyone.I have been lurking around at this forum for a while and i must say that i have seen a lot of very good work here.
I have an old Mondiale simplex lathe, a Bernardo KF25L mill (one of those BF20L clones)and a Scantool pilar drilling machine.:D
 
Welcome to the forum. And what brings you here? It helps a little to know you interests and dreams . that helps us help you meet your hobby goals.
Tin
 
20 years ago i learned machining in school and then didn't use it for more than 10 years. Then i wanted to get some machines and slowly begin remember old tricks.
I have always been intereted in ic engines and have now begun building them. Last Winter I made a Boll aero 18. The engine doesent look bad but it is currently a norunner. Hopefully i will make it a runner after some debugging. ;)
 

Latest posts

Back
Top