help needed for ka counter

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bmuss51

Well-Known Member
Joined
Feb 6, 2009
Messages
63
Reaction score
0
just installed a mitutoyo ka counter on a lathe and the counter only reads in full thousands in the x but in the y it reads half's so I would like to get into the parameters and see about changing the counter to read half thousands in the x. also the y reads correct as far as plus and minus but the x is reading the wrong way. so can anybody help with this problem?
 

Latest posts

Back
Top