Harbor freight mini lathe help!

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

oregonsteam

Active Member
Joined
Jul 29, 2008
Messages
44
Reaction score
0
My harbor freight mini lathe spindle suddenly turns free as the motor is running. I took of the end panel and no gears appear broken. How do you get to the spindle that holds the chuck? I think a pin might have sheared off. Thanks!


Mike
 
Does your mini lathe have the H/L gear shift lever on the back side of the machine?

minilatheH-Llever.jpg


I have seen things go wrong with that in the past.

Rick
 
I took the lathe apart, and found the hi/lo gear in pieces. It was a little tricky getting it apart, but I ordered the new gear today, and hopefully I will be able to get it back together in a week or so.


Mike
 
Back
Top