Don1966
Senior Member
- Joined
- Jan 19, 2012
- Messages
- 487
- Reaction score
- 24
This was a weekend project I decided to make, it is an Adjustable Hone. As you can see from the Quarter next to it it is not made for big shafts.
I did not do any built photos it just basic cutting. It work very well and was featured in the Model Engine Builders Magazine.
Thought I would share it with you.
Regards Don
I did not do any built photos it just basic cutting. It work very well and was featured in the Model Engine Builders Magazine.
Thought I would share it with you.
Regards Don