MedfordChris
New Member
- Joined
- Dec 12, 2013
- Messages
- 3
- Reaction score
- 0
Quorn Mk-II Universal Tool and Cutter Grinder
Construction is about 95% complete and it looks like it may have only ever tried out a handful of times.
It had been sitting, covered, for some years as the original owner/builder had passed away.
All I have done to it is oiled it up and bolt it to a piece of wood, to make it easier to carry. (It's much heavier than it looks!)
Includes: 95% completed Quorn tool & cutter grinder, grinding wheels of different profiles & grits, different sized arbors for the wheels, 0.15kW (.20 hp) 115v motor, unmachined castings for the spirialing head bracket and tailstock bracket
Also included are the following documents:
"The Quorn Universal Tool and Cutter Grinder" book by Professor D H Chaddock (brown commercially published book)
"Operating Instructions for the Quorn Tool & Cutter Grinder" book by Professor D. H. Chaddock (yellow comb bound book)
Original 'Quorn' Tool & Cutter Grinder Mark 2 full-size blueprints: sheet 1 of 4, sheet 2 of 4, and sheet 3 of 4 (unfortunately missing sheet 4 of 4)
Asking $400 for the entire package.
Located just outside of Boston, MA.
Additional photos here: https://goo.gl/photos/QKC9bw3nJymvnpUw9
Construction is about 95% complete and it looks like it may have only ever tried out a handful of times.
It had been sitting, covered, for some years as the original owner/builder had passed away.
All I have done to it is oiled it up and bolt it to a piece of wood, to make it easier to carry. (It's much heavier than it looks!)
Includes: 95% completed Quorn tool & cutter grinder, grinding wheels of different profiles & grits, different sized arbors for the wheels, 0.15kW (.20 hp) 115v motor, unmachined castings for the spirialing head bracket and tailstock bracket
Also included are the following documents:
"The Quorn Universal Tool and Cutter Grinder" book by Professor D H Chaddock (brown commercially published book)
"Operating Instructions for the Quorn Tool & Cutter Grinder" book by Professor D. H. Chaddock (yellow comb bound book)
Original 'Quorn' Tool & Cutter Grinder Mark 2 full-size blueprints: sheet 1 of 4, sheet 2 of 4, and sheet 3 of 4 (unfortunately missing sheet 4 of 4)
Asking $400 for the entire package.
Located just outside of Boston, MA.
Additional photos here: https://goo.gl/photos/QKC9bw3nJymvnpUw9